Barrels & Casks Online Store

Whiskey barrels - Oak gives real character to the Whiskey
Views: this article has been read 57192 times
Abstract: Whiskey barrels and the interaction between the oak and the whiskey and is one of the most interesting, if not completely understood components of the whiskey production process.

Whiskey barrels and the interaction between the oak and the whiskey and is one of the most interesting, if not completely understood components of the whiskey production process.

The quality of the Whisky barrels is carefully monitored because the new spirit is to gain character and colour from the wood in which it rests.

Some casks will previously have been used to mature oloroso, fino or amontillado sherries; some will have contained bourbon and some will be oak.

The type of Whiskey barrel used for maturation will have been determined by the Master Blender who is seeking a particular character and continuity of the whiskey.

Only after a minimum of three years maturation can the new make spirit be legally defined as Scotch Whisky.

In practice, most Scotch Whisky matures for much longer - from five to fifteen, twenty, or twenty-five years and sometimes longer.

It is this lingering period during which Scotland’s cool, clean air steals through the porous oak of the casks and charms their contents, contributing further to the smooth and golden character of each distillery’s unique creation.

A proportion of the whiskey in each cask evaporates annually and is lost to the heavens. This is known as the "angels’ share".

Why Oak?

 One of the most frequently asked questions is “Why do whiskey makers use Oak Whiskey barrels?”

The reason that Oak is utilized is its unique physical and chemical nature. Oak has strength - physically, its wide radial rays give strength when shaped for a cask;

Oak is also a "pure wood" as opposed to pine or rubber trees which contain resin canals that can pass strong flavors to maturing whisky.

But it’s not just the Oak itself, it’s the transformation that happens to the Oak as a result of the seasoning and heating treatments during the coopering process - these result in the production of pleasant-tasting Oak lactones.

Whiskey barrels made from Oak have three broad effects on the spirit:

As an additive - It adds to the taste and aroma of the spirit by providing desirable elements from the cask. For example: vanillin, Oak lactone (coconut, bourbon character), toastiness, wood sugars and color.

As an agent that removes undesirable elements from new make spirit. For example: sulphur compounds and immaturity.

Oak barrels also interacts with the spirit. It adds extractive wood elements from the cask and converts them to organoleptically desirable elements.

For example it will change tannins to acetals, and change acetic acid to fruity esthers.

It has been said that there are 5 specific constituents of Oak and identifies how they influence maturing spirit:

Cellulose - Which has virtually no effect other than to hold the wood together.

Hemicellulose - Which consists of simple sugars that break down when heated and provide:

Body: through the addition of wood sugars

"Toasty & carmelised aromas & flavors"

Colour (unaged or "new make" whisky is a clear liquid)

Lignin - The binding agent that hold the cellulose in wood together which, when heated yield:


Sweet, smoky and spice aromas

Oak Tannins* - Which play an essential role in maturation by enabling oxidation and the creation of delicate fragrance in spirits. Tannins combine with oxygen and other compounds in the spirit to form acetals over time.

*Naturally occurring preservative compounds with a slightly puckery, astringent taste in the mouth, similar to the effect of strong black tea or fresh walnuts.

Oak Lactones - Resulting from lipids in the Oak, they increase dramatically during toasting and charring and can pass on a strong woody and perhaps coconut character; lactones give bourbon its distinctive character; and occur in higher concentrations in American Oak than in European varieties.

Will any Oak Whiskey barrel do?

Just three species of oak are used for wine and whisky barrel making or cooperage:

Quercus Alba, “White Oak” (America). Commonly referred to as “American Oak” and is the most commonly used variety in whisky cooperage.

More vanillin than European varieties Fast growth High in lactones, which when toasted, provide woody, vanilla, and coconut flavors

Quercus Petraea, “Sessile Oak” (Europe). Found across Europe, notably in France. Most commonly used for wine cooperage.

Slow growth, fine tannins and more vanilla (compared to Pedunculate)

Most common species in Tronçais forest

Quercus Robur, “Pedunculate Oak” (Europe). Found across Europe.

Spanish Oak generates more raisin, prune-like flavors.

Most commonly used for cognac and sherry cooperage.

Fast growth, more tannins, thus more oxidative characteristics in the matured products (compared to Sessile).

Most common species in Limousin forest

There are a number of other factors in how wood affects whisky. Chief among them are:

- Growth rate of the "donor trees";

- Method and length of time to dry the wood;

- Toasting and charring during cooperage.

Impact of Oak Growth Rate: Slower is Better

Winemakers are convinced of the relationship between Oak growth rates and the flavor and quality of their wines; while in whiskey, this factor is not widely considered.

It is known that slow growth Oak used in the making of whiskey barrels has more of the “good stuff” - especially vanillins and Oak lactones. White Oak is "fast-growth."

Once the wood is cut, the method used to season (dry) the wood has a huge impact. The wood MUST be dried before being used to make Whiskey barrels - the drying process converts chemical compounds in the wood to more desirable types.

How the wood is dried and for how long has a direct impact on the quality of the spirit.

It's accepted that air seasoning is better than kiln drying (it reduces tannic astringency as well as releases more vanillin), yet, while the barrels used to age wine may be made of staves which have been air dried for as much as 24 months - most bourbon whiskey barrels are made from wood which has been kiln dried in a matter of weeks.

Why? Some distillers think that the method for drying the wood is only important for the first-fill of a spirit aged in a new cask, (e.g., wine or bourbon) and has little or no impact when maturing spirits in previously used casks - and of course, Scotch is aged in previously used casks.

The Importance of Heat

The application of heat is integral to the process of making the barrel - wood fibers behave much like plastic polymers - they want to be straight.

In order to bend the staves, they need to be heated. The straight staves are arranged inside a metal hoop and heated. I have heard that either an open flame or steam may be used. As they are heated they become more pliable and are shaped

- hoops of various diameters are added to each end - six in total

- which are hammered down, towards the middle. Each hoop is held in place by the pressure exerted by the staves as they try to straighten themselves. The whiskey barells are then toasted which caramelizes the wood sugars.

This is where the construction of bourbon whiskey barrels casks and sherry casks diverge.

Bourbon Casks

The Whiskey barrels, once formed, are charred - the inside of the cask is set on fire for a short period of time, which creates a black charred layer.

There are various levels of charring which will have different affects on the spectrum of compounds and flavors the Oak will impart to the maturing spirit: more vanillins, lactones, "toastiness," spice characters, and tannins.

Charring casks causes further transformation. Char (carbon) removes sulphur compounds and immaturity from new spirit. Bourbon Whiskey barrels are typically charred for 40 seconds to 1 minute, but some distilleries have experimented with charring times of up to 3-4 minutes.

The result of charring is dramatic changes on the surface - for example, wood sugars are caramelized, which will leech into the maturing spirit.

Sherry Barrels

Sherry casks are only toasted and not charred. The casks used to mature Oloroso are the most popular with the Scotch industry.

Sherry casks can be made of American Oak, but this is usually for Fino Sherries and are generally not used by the Scotch industry.

It's accepted that European Oak adds more flavor thanAmerican Oak - sherry cask matured whiskies tend to be more full-bodied than bourbon Whiskey barrels matured ones, and this is likely the result of the type of wood, just as much as the type previous liquid occupant.

More History

The wide-spread use of bourbon whiskey barrels is a fairly recent occurrence - a result of the difficulty in sourcing sherry casks during the Spanish civil war in the late 1930's.

Currently any where from 300,000 - 400,000 bourbon casks are acquired for use in the maturation of Scotch whisky - in contrast to only about 18,000 sherry casks.

Contrary to popular belief, very few whiskies are aged exclusively in bourbon barrels - most ex-bourbon aged malts are vatted with a (varying) percentage of whiskey which was aged in ex-sherry barrels.

Laphroaig, Glemorangie 10, Ardbeg 10, Glenlivet 12, are among those few "pure" ex-bourbon matured whiskies.


For more information on whiskey please see:  whiskey wise 


How would you rate this article?

User Feedback
Comment posted by richi bieltz on Wednesday, May 11, 2011 2:16 PM
Very good article; instructing too.
Comment posted by richi bieltz on Thursday, June 2, 2011 11:03 AM
very giid article.
Comment posted by bob shook on Sunday, August 19, 2012 1:09 AM
can barrels be used more than once?
Comment posted by Jim on Saturday, January 5, 2013 12:13 AM
Can you tell me what the difference is in the varnished or unvarnished barrels? Does the varnish impact the aging of the whiskey? Does it lengthen the life of the barrel? Why or why not get the varnished version?
I am thinking of ordering barrels to age whiskey and would like information about the the varnished barrels.
Comment posted by David Chiriboga on Friday, April 12, 2013 10:05 AM
Am interested in whether the type of metal used to bind the staves together could make any difference. in other words, brass vs steel (and plain steel vs painted)
Comment posted by Colleenie on Sunday, October 13, 2013 3:52 PM
I too was wondering about the varnished ones.  
What whiskeys are people adding to their barrels? Have you liked the results.  Planning on getting 2 of the wee ones and do 1 with sherry or cabernet and 1 with bourbon.
Comment posted by 334PAN@GMAIL.COM on Saturday, October 19, 2013 4:50 PM
Comment posted by Tyson on Thursday, November 21, 2013 11:25 AM
The varnished barrels are for decoration mostly and to preserve the look of the wood.  The unvarnished is better for aging any spirit, wine, cider, etc.  The unvarnished will allow it to breathe better and complete the process.  Racking fresh pressed hard cider into a 20L one this year and will try my hand at others in the future.  
Comment posted by on Friday, October 24, 2014 6:47 PM
I got a 1 litre varnished as a decoration. Can't comment on the how well it works, but it is EXACTLY what i wanted. Thanks!
Comment posted by Joe CLeereman on Sunday, September 20, 2015 8:23 PM
I have a 2.5 gal barrel that I have had filled for about 8 months. DAM , The whisky that came out is freakin awesome. Many have said better then Makers Mark. I am aging my second batch in the barrel now. I will be buying more this year. This article was most helpful and very very informative. I learned alot.
                   Thank you
Comment posted by Brad on Thursday, November 12, 2015 11:06 PM
What's the best cheap scotch to age into something like a Macallen (taste/quality)?
Comment posted by Barbara Olack on Tuesday, December 22, 2015 1:40 AM
We have a Bernese mountain dog puppy and I bought a cask to put around his neck to bring out to my husband who drinks bourbon Manhattans on Christmas Eve. What do I need to  do prime it before I add "Grandpa's Medicine?"
Comment posted by Mike on Saturday, October 22, 2016 1:03 PM
How many uses can you get out of a barrel before it is used up for Whiskey and for aging beer.
Comment posted by on Monday, August 14, 2017 1:54 PM
Surprised that the barrels I ordered have aluminum spigots and an unknown rubber wrapped around the Bung. Aluminum should never be in contact with alcohol for human consumption. And most rubbers are not safe either.
Comment posted by on Monday, August 14, 2017 2:13 PM
Surprised that the barrels I ordered have aluminum spigots and an unknown rubber wrapped around the Bung. Aluminum should never be in contact with alcohol for human consumption. And most rubbers are not safe either.
Comment posted by on Monday, August 14, 2017 4:06 PM
Surprised that the barrels I ordered have aluminum spigots and an unknown rubber wrapped around the Bung. Aluminum should never be in contact with alcohol for human consumption. And most rubbers are not safe either.
Comment posted by on Monday, February 26, 2018 10:50 PM
Once I receive my barrel , I was told to fill the barrel with water so the wood will  be saturated fully with water and absorb no alohol.
Comment posted by ralph on Sunday, November 18, 2018 8:55 AM
Aluminum is one of the most abundant elements on earth.  Every day the average human ingest .12mg of aluminum and the fda says even up to 71mg/day has shown no adverse effects on humans.  Why do you think aluminum cans hold alcoholic beverages.  As for rubber, it is another natural product that has been used in South America for hundreds of years to store tonics containing alcohol, even the alcohol industry is moving towards rubber corks, which the FDA wouldn't allow if it wasn't safe. I did the research so don't be scared by a repetitive moron.

Post your comment
Insert Cancel
Shopping Cart

Your cart is currently empty.

Order History

Register to the site for free, and subscribe to the newsletter.

Share this: